water treatment flocculant

PDADMAC can be widely used in industrial waste water and surface water purification as well as sludge thickening and dewatering. It can improve water clarity at a relatively low dose. It has good activity that accelerate the sedimentation rate. It is suitable for a wide range of PH 4-10. This product can also be used in the colliery waste water, paper making waste water, oil field and oil refinery oily waste water and urban sewage treatment.

Our factory located in Hubei province China, is a leading enterprise in the water treatment industry. With about 10 years of expertise, we specialize in the research, development, and production of high-performance water treatment agents such as high-purity polychorinated aluminum and decolorizing agents. Our annual production capacity includes 40,000 MTS of decolorizing agents and over 10,000 MTS of high-purity polychlorinated aluminum, serving a wide range of industrial and municipal wastewater treatment needs.

The polymer body contains strong cationic group redical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste through electro-neutralization and bridging adsorption. It is very effective in flocculating, decoloring , killing algae and removing organics The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable towide range of PH value, between 4.0 and 10.0 It is smelless, tastless and harmless. It can be widely used to treat source water and sewage water.

1. When used alone, it should be diluted to the concentration of 0.5%-5%(based on solid content). 2. In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the jar test. 3. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken. 4. It is better to dose the product continuously.